Elevate your garden and walkways with our Concrete Paver Stencils. Simply use any of our stencils in our paver mould, pour concrete and allow to cure for a one of a kind paver that is uniquely yours! Create, duplicate and decorate your spaces with our line of Concrete Stencils.
Farm Fresh Stencil
8" X 8" and 11" X 10.5"
In general, it's possible to stencil over textured surfaces, however it depends on the roughness of your texture and your desired outcome.
Some textures are really rough, with huge "peaks and valleys" and, if this is your case, stenciling may not be an option. However, there are light to medium textures that are very suitable for stenciling.
With textures it is especially important that you put very little paint on your brush and always off-load it onto a paper towel. Use a rubbing/dabbing motion while stenciling and try not to force the paint under the edges of the stencil. You can also use a dense foam roller, but make sure that you off-load it onto some paper towels so that it is relatively dry. To avoid seepage, use very little paint, and don't press hard on the roller. Using spray adhesive can also help prevent seepage of paint under the stencils. We love Elmer's re-positionable spray adhesive but most re-positionable spray adhesives are fine. Always test the stencil on a disposable surface first (such as a piece of cardboard), or try stenciling a small area in a corner somewhere and immediately wipe the stenciled paint off the wall with a moist baby wipe. Also, it's good to remember that using high-contrast colors (like black over white) is much less forgiving than using colors that are similar to each other.
We find that it is not necessary to use spray adhesive with our stencils. However, if you want crisper edges or are stenciling with high contrasting colors, please use it (Elmer's spray adhesive seems to be the best). It is helpful for beginners to mist a stencil with spray adhesive just to make sure you get great results. Always use pieces of blue painters tape to secure your stencil in place.
You can create custom stenciled curtains, pillows and tablecloths with our stencils! When stenciling on fabric, stencil adhesive is very helpful. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. Use stencil brushes, or roller, and add some textile medium to your acrylic paint. You can also get a special fabric paint, but, frankly, good craft acrylics with a dollop of textile medium work just as well, and costs way less too! :) Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20 seconds (more or less) on a LOW setting through a piece of cloth. Heat-setting will cure the paint and prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. We've stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture.